S

4 Speed Sequential Transmission

This gearbox is ideally suited for drift cars with a wide torque band. The gears are straight cut strong and diamond ground to DIN5/DIN6 standards for maximum efficiency and even load distribution across the gear teeth. Constant-mesh dog engagement for shifts as quick as 40 milliseconds. Probably the worlds quietest straight cut geared, sequentially shifted, dog engaged gearbox, with almost none of the whine traditionally associated with this industry race standard. This sequential transmission is totally streetable and generates less heat than competitors. Gears have been successfully tested behind engines with 1500hp/1100kw and 1200ftlb/1600nm in race conditions.

Enquire

Chillout Motorsports Main Menu Logo

Need a little more information? Contact Us Today!

We love to hear from our customers. Including the ones that aren’t customers yet. You’re going to like what we have to say.

This gearbox is ideally suited for drift cars with a wide torque band. The gears are straight cut strong and diamond ground to DIN5/DIN6 standards for maximum efficiency and even load distribution across the gear teeth. Constant-mesh dog engagement for shifts as quick as 40 milliseconds. Probably the worlds quietest straight cut geared, sequentially shifted, dog engaged gearbox, with almost none of the whine traditionally associated with this industry race standard. This sequential transmission is totally streetable and generates less heat than competitors. Gears have been successfully tested behind engines with 1500hp/1100kw and 1200ftlb/1600nm in race conditions.

Internal Splash

O-Ring

GM 26 tooth spline, GM/Nissan 26 tooth spline with Nissan spigot, Mazda 23 tooth spline, Nissan 24 tooth spline, Toyota 21 tooth spline (R154), and Toyota 14 tooth spline (V160 / V161/ 6MT)

40mm (Long) , 180mm (Wide), and 277mm (Tall)

Choose one column

1st

2nd

3rd

4th

Rev

2.36

1.65

1.23

1.00

1.94

2.16

1.65

1.23

1.00

1.94

Oil Outlet and Inlet for lines to Pump, Filter and Cooler options, Gearbox Breather, Oil Temperature Sensor, Oil Fill, and Oil Drain with a magnetic plug

["1000 nm "
"64 ftlb"
"102kg"
"11
000 RPM"]

GM Muncie

Flange pre-drilled for 1350 Series Yoke or Slip Yoke – supplied with hardware. Comes pre-fitted with a reluctor wheel ready to accept our Speed Sensor to enable launch control, traction control, speed referenced boost or a digital speedometer.

HGT Billet CNC Shift Lever with remote mount base. Centre of Tunnel, Right or Left Offset shift lever positions. Two different height options to accommodate driver preference. Reverse is integrated into the shift lever and comes with trigger for a reverse light and loom, or reverse can be remotely mounted for Paddle Shift setups , HGT Shift Cut Knob - Analogue signal with a full-bridge system, HGT Billet Paddleshift interface brackets for Motec, Geartronics, Shiftec and Life Racing actuators, HGT Billet CNC Digital Gear Position Display, HGT Billet Push Clutch Release Bearing with Shims, HGT Billet Speed Sensor Bracket and GT101 Sensor, and HGT Breather Kit 1350 Series Yokes bolt up to output flange and weld to the driveshaft, Slip Yoke for once piece or Non-Slip Yoke for two-piece driveshafts

Cast or Billet CNCVernier Bell Housesto allow direct fitting of HGT Gearboxes to:

BMW: Straight 6 M50, V8 M60, M62, S62, S65, V10 S85, GM: LS/SBC OEM setup with 168 tooth ring gear, front mount starter motor 11”/12” clutch OR Race setup with a cover-mounted 110 tooth ring gear, rear mount starter motor and 5.5"/7.25" clutch , Mazda: Series 6 Rotary rear mount starter, MZR-L Series, Mitsubishi: EVO 1/2/3 RWD , Nissan: SR20, RB20, RB25, RB26, RB30, VQ35, VQ37, VR38 RWD, L-Series, Toyota: 1JZ, 2JZ, 1UZ, 3UZ, 3SGE Beams, 86, 4AGE, and Others available on request...just ask!

HGT Precision design and manufacture a range of Sequential Gearboxes and Motorsport Transmissions for race cars and performance vehicles.

HGT Precision's principle of no compromise on Quality, Consistency or Reliability has enabled our brand to build rapidly on a global basis. To ensure these non-negotiables are delivered, we invest in the best materials, manufacturing with premium quality European equipment with a talented and motivated team. 

The Swiss are famous for consistency and high quality, which is why we chose Switzerland as our manufacturing base. Craftsmanship, exacting standards and a commitment to excellence are visible in every one of our hand-built billet CNC masterpieces. The factory is ISO 9001 accredited which means HGT Precision sequential gearboxes are made the same way, to the same precise standards – every single time.

ENQUIRE NOW