Image caption appears here


Our Quantum Cooler series of coolers are the most powerful and portable cooling systems ever designed for motor sport. Requiring no ice, this driver cooling system is completely maintenance free, running solely off the strength of a rotary micro-compressor that is as powerful as other compressors 5 x its size.

Rated at 20 liters per minute/16 psi, the Quantum Pro is capable of chilling to under 35º F/1.6ºC. Max amp draw is rated at 18-22 amps (depending on installation and environmental conditions). The system contains less than 1.75 oz./51.7 ml. of Freon sealed within the rotary micro-compressor system.

The Quantum Pro offers many different temperature settings that support varying performance conditions. Dual 220 cfm fans help decrease amp draw, and an illuminated easy-to-read color digital display offers valuable information and data.

Weighing in at 10.5 lbs/4.7 kg, the Quantum Pro is hot-swappable so you can quickly move it from mounting location to mounting location within seconds.

Dash mountable digital control displays are available for installations out of reach from the driver (sold separately)

For the best results, please consider the interior temperature of your vehicle and keep in mind that ducting may be necessary for most installations. Using 4 inch ducting is highly recommended and eliminates the need for a supplemental blower. 3 inch ducting, though effective, can be very restrictive and require the use of a high performance (250+ cfm) blower.


  • Full color LCD display with extensive data
  • Internal bi-pass valve eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected.
  • Dual 4 inch 220 cfm brush-less fans
  • 50% larger condenser.
  • 25% larger evaporator.
  • LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources
  • Coolant reservoir has double the capacity at 13 oz's
  • Eco mode maintains system under 18 amps at all times
  • Carbon Fiber Mounting Plate, further reducing weight and heat-soak
  • Two flow sensors for monitoring both sides of the flow valves for easy troubleshooting and maintenance
  • IP65 Rated


  • Quantum Cooler Pro
  • Carbon Fiber Mounting Plate
  • Wiring Harness
  • Locking Ball Pins
  • Priming Tube

1 Response

Nate Schirmer

Nate Schirmer

October 30, 2023

What are the dimensions for the Quantum Cooler Pro? I have a left-hand drive Radical SR3XX with a passenger seat. I figured I would mount it on the passenger’s floorboard. Do you know if there will be enough room? I also plan to move it between the Radical and my Subaru BRZ track car, so it needs to be accessible and not too hard to take in and out of the Radical.

Thank you.

Leave a comment (all fields required)